Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the REM-RB50CM IP Curve.
•
DO NOT:
•
Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
•
Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
•
Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
•
Locations where normal temperatures exceed the temperature ranges in this manual.
•
Locations that are prone to flooding or being buried in snow.
•
Other areas where the product will be subject to extreme radiation or caustic substances.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
•
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
•
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
•
In the event of a serious operating problem, stop using immediately.
What is Included
•
REM-RB50CM IP Curve
•
Quick Reference Guide
Mounting
Before mounting this product, read the
weight of the products.
Mounting Diagram
Alignment
conical (x2)
1
QUICK REFERENCE GUIDE
Safety
Notes. Make sure the mounting hardware is capable of supporting the
Male speego
connection
Tightening
knob
Female speego
connection
(For use with
Ground Support 2 Kit)
Locking latch
REM-RB50CM IP Curve QRG Rev. 1
Rig Bar Speego
Spring
knob
Locking
bar
Curve speego
connection
(-5°, -2.5°, 0°, +5°, +10°)
Publicidad
