Publicidad
Idiomas disponibles
Idiomas disponibles
English
• Keep it away from liquids and extreme heat.
• The power strip should only be plugged into a grounded outlet.
• Do not connect after each other.
• Do not cover when in use.
• Disconnected from Voltage only when the plug is pulled out.
• Unplug the product during the thunderstorms.
• Replacement is recommended after a serious power surge or several years of
using.
Installation and Operation
1.
Plug the power strip into a wall socket.
2.
Turn on the power switch and connect your electric appliance and electronic
devices to the AC outlets and USB ports.
3.
Unplug your USB devices from the power strip when fully charged or not in
use. Switch off the power switch and unplug it from the wall socket.
Indicator Light
1.
Power, surge protection and grounded indicators are located inside the
casing and are only visible when lit.
2.
Surge protection (red) and grounded (green) indicators are lit when it works
normally. If the lights are unlit, please restart the power strip. If the fault is still
there, stop using the product.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2023
-3-
Publicidad
