E N G L I S H •
Us er 's M an u a l
GROUND FAULT CIRCUIT INTERRUPTER TRIPS
AND WILL NOT RESET
Damaged power cord or extension cord. Re-
place cords.
Short circuit in motor. Take motor to authorized
repair center.
Faulty ground fault circuit interrupter. Replace
ground fault circuit interrupter.
MOTOR TURNS BUT DRUM DOES NOT
Safety Slip Clutch (optional) engaged. Do not
force cable.
FAILURE TO FEED
Cable tangled in drum. Do not run machine in
reverse. Use proper cable size.
Feed mis adjusted. If feed tension knob is too
loose the cable will slip. If it is too tight the feed
rollers will wear prematurely.
Feed roller frozen. Clean and lubricate feed roll-
ers regularly. Replace worn rollers.
Worn cable. When cable coils wear flat, cable
should be replaced.
17