Publicidad
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3
times. The option will not be enabled.
PUSH & GO
Push&Go button is an easily distinguishable button that allows
you direct access to the Push&Go program, a wash and dry
cycle that ensures great cleaning performance in a short time.
You don't have to worry which program to choose, Push&Go
cycle will do the work for you.
To select Push&Go program, switch on appliance, press only
Push&Go button for 3 seconds.
DELAY
It is possible to delay the start time of the program by 2, 4
or 8 hours:
1. After selecting the desired program and any other options,
press the DELAY button. The indicator light will go on.
2. Select the desired delay time by pressing the DELAY button
repeatedly. The 2 hours, 4 hours and 8 hours indicator lights
will go on in succession. If the DELAY button is pressed
again, the option is deselected and the indicator light
goes off;
3. After the selection process, the countdown will begin if the
START/PAUSE button is pressed. The selected delay period
indicator light is on and the START/PAUSE button lights up
(fixed light).
4. Once this time has elapsed, the DELAY indicator light goes
off and the program begins.
The DELAY function cannot be set once a program has
been started.
4
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function
can be used.
A long press of START/PAUSE button, will activate the DRAIN
OUT function. The active program will be stopped and the
water in the dishwasher will be drained out.
Publicidad
