The cushion will face up when
the unit is turned upright.
① x 2
④ x 6
4. Attach the Seat Frame (B) to one Chair Backrest (A) with the end dowel fully inserted. Make sure the
seat cushion will face up when the unit is turned upright. Insert the 80 mm Bolts (2) with Lock Washers
(4) and Flat Washers (5) through the drilled holes on the seat frame at rear corner blocks and loosely
tighten into the threaded inserts on the Backrest (A).
5. Secure the Seat Frame (B) to the Chair Backrest (A) by inserting two 38 mm Bolts (1) with the Washers
(4 and 5) through the drilled holes on the rear rail of the Seat Frame. Tighten the bolts with the Ratchet
Wrench provided.
Assembly Instructions
B
A
5
B
2
4
5
1
4
5
A
② x 4
⑤ x 6