Publicidad
Idiomas disponibles
Idiomas disponibles
5. DC input to power/charge the speaker
6. ON/OFF switch
7. : In BT/USB/MicroSD mode: press shortly =Previous song
In AUX mode, this button has no function
8. ▶ǁ Play/pause: In USB/MicroSD/BT mode this button has the Play/Pause function
In AUX mode, this button has no function
9. : In BT/USB/MicroSD mode: press shortly = Next song;
In AUX mode: no function
10. MODE switch to select among AUX/BT/USB/MicroSD mode.
11. Repeat button: Repeat one song, repeat all songs
12. BT button: in BT mode: press to disconnect the Bluetooth source. In any other mode: Long press to
connect BT
13. Press to cycle through 6 light effect modes and switch the LED illumination on and off
14. MENU button: details see below
15. Volume control
16. LED display
MENU BUTTON (14)
This button allows to make various adjustments in conjunction with the VOLUME control (15). Press the MENU
button:
• If b is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the sound output
• If t is displayed, rotate the VOLUME control (15) to adjust the high frequencies of the sound output
• If MU is displayed, rotate the VOLUME control (15) to adjust the microphone volume
• If EC is displayed, rotate the VOLUME control (15) to adjust the echo effect of the microphone
• If Mb is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the microphone
• If Mt is displayed, rotate the VOLUME control (15) to adjust the high frequencies of the microphone
• If U is displayed, rotate the VOLUME control (15) to adjust the master volume. You can adjust the master vo-
lume also directly any time by rotating the VOLUME wheel (15)
INSTRUCTIONS OF USE
• Press the ON/OFF button to switch the unit on.
• Press the MODE button to select an input source between AUX/BT/USB/MicroSD or plug in an auxiliary source,
USB or micro-SD and the speaker will automatically switch to the source you just plugged in.
• To use BT mode, you must first pair your smartphone or any other Bluetooth-enabled device with the speaker.
To select BT mode when a device has been paired, press the MODE button until BLUE is displayed.
BT PAIRING MODE:
1. Press MODE button until BT is displayed.
2. Put the cell phone within 3 meters;
3. Activate the BT features on your cell phone so that the cell phone starts to search for the BT device. Please
refer to the users' manual for details
4. Select "WAVE6" from the device list found by the cell phone;
5. Press RETURN key on the cell phone to exit from the cell phone menu and play music with the unit when
there is no barrier between two cell phones within 10 meters. At this time, you can play music with the unit.
6. Shortly press PLAY/PAUSE button to play or pause music. Short press " " or "" key to select the previous
or next track.
TWS PAIRING MODE:
1. Make sure both speakers are OFF.
2. Go to your phone's Bluetooth interface and make sure that it is not connected to either of the speakers. If
your phone is connected, choose to forget or remove the speakers from the list of available devices.
3. Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both
LCD screens and flash intermittently.
4. Press the « NEXT » button on either one of the speakers for 5 seconds. Both units will enter pairing mode.
5. One of the units will show the word « BLUE » on the LCD display. This is the master unit and will act as the
left channel, while the other one will be the slave unit and will act as the right channel.
6. Go to your phone's Bluetooth interface and select « WAVE6 » from the list of available devices. If pairing is
successful, the word BLUE on the master unit will stop flashing.
7. To disconnect the speakers, select any other mode on either one of the speakers.
4
MANUAL - WAVE6
Code: 10-5549
Publicidad
