JBM 54327 Manual De Instrucciones página 6

GSW-22
GSW-23
GSW-24
ASSEMBLY
STEP 1: Install the adjustable legs (GSW-14) and fixed legs
(GSW-15) under the GSW-01, GSW-03 and GSW-04.
Use M6x12 bolts (GSW-18) to secure the legs (GSW-15).
STEP 2: Place GSW-01, GSW-03 and GSW-04 in the desi-
red order and position. Make sure that the distance be-
tween GSW-3 and GSW-4 is 680mm.
STEP 3: Install the 4 posts (GSW-12) on the back of the ca-
binets. Put the two rear panels (GSW-24) between GSW-3
and GSW-4. Attach the posts to the cabinets and panels
with M5x12 screws (GSW-17).
Wall plug (x2)
Extension bar (x2)
Rear panels (x2)
· 6 ·
STEP 4: Install the 6 perforated panels (GSW-06) with M5x12
screws (GSW-17).
STEP 5: Install the 3 wall cabinets (GSW-05) with M5x12
screws (GSW-17).
STEP 6: Put the MDF board (GSW-13).
Install the baseboards (GSW-09, GSW-10 and GSW-11)
using the M5x12 screws (GSW-17).
STEP 7: Attach the MDF board to the tall cabinet with
M4x20 screws.
Attach each post to the MSF board with M4x20 screws.
REF.54327