Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the front wheel
Noted: Only two-wheel drive needs to be installed dotted line shims.
● Slide a 12mm shim, the wheel a 10mm shim and an M10 nut onto one side of
the front axle. Make sure the wheel's bulge matches the gearbox.
● Use the socket wrench to tighten the nut.
● Repeat on the other side.
● Attach the wheel cover by aligning the buckle and pushing firmly until it clicks
into place.
Installing steering wheel
● Connect the steering wheel interface to the jack on the steering rod's fixed
base (Figure 1).
● Push the connected jack and interface into the base (Figure 2).
● Insert the steering wheel into the fixed base of the steering rod. Push the
steering wheel down firmly until it clicks into place.
7
6
Publicidad
