DURAVIT Sundeck 700066 Instrucciones De Montaje página 5

Important information
About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
NOTE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NOTE!
Local installation regulations and any country­specific
standards must be observed at all times.
Installation information
Please read pre­installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
22
Observing a clearance (Diagram 22)
> Observe a uniform clearance of maximum 2 mm
between the bathtub panel and the bathtub and
readjust this if necessary
25
Checking the Bowden cable (Diagram 25)
> In the case of bathtubs with a pre­installed
Bowden cable, check the function and readjust it
if necessary.
29
NOTE! Observing the sealing time! (Diagram 29)
> Mount the bathtub panel immediately after
attaching the sealing strip to guarantee that it is
leak­tight.
30
NOTE! Taking maintenance into account! (Diagram 30)
> The bathtub panel must be accessible and
removable for maintenance.
5
BA_M_Sundeck_FST_MV/12.11.2