13 CLEANING
The cleaning operations can be performed by the user as
long as all the instructions given in this manual have been
read and understood.
It is recommended to carry out the cleaning
operations with the stove off and cold.
Opening the door
To open the door, use the opening lever wearing
a glove for high temperatures.
Cleaning the inside of the hearth
Daily or before each ignition, it is necessary to check that
the burn pot is clean to ensure the free fl ow of combustion
air from the holes of the burn pot itself.
Remove the ash that has accumulated inside the burn pot
(fi g. 1).
If necessary, remove the ash drawer and empty it out,
taking care to remove any residues from the compartment
that contains (fi g. 1).
Using an ash vacuum can simplify the cleaning
operations.
Cleaning the fl ue compartment
The fl ue compartment must be cleaned every 2 months or
whenever necessary.
After cleaning the burn pot, remove it and clean the
compartment that contains it (fi g. 2).
Remove the ash drawer and, using a special ash vacuum,
remove any residues in the compartment that contains it.
CAUTION: to clean the exchanger circuit and fl ue
box, contact a qualifi ed technical assistance centre.
Cleaning the fl ue gas circuit
Every 400 kg of pellets burnt, or once per season, the fl ue
gas circuit needs to be cleaned of any residue (fi g.3).
Cleaning the glass
It is carried out with a damp cloth or with dampened paper
that is wiped over the ash (fi g.4).
Rub until the glass is clean.
Do not clean the glass while the stove is on and do not use
abrasive sponges.
The fi re door glass should be cleaned every day.
Cleaning the fl ue gas ducting
Every 400 kg of pellets burnt, or once per season, the fl ue
ducts need to be cleaned of any residue.
Once per year, clean any soot using brushes.
24
02/2023 - EN
OPTIONAL ASH DRAWER
Fig. 1
Fig. 1
Fig. 2
Fig. 2