Publicidad
Idiomas disponibles
Idiomas disponibles
How to attach the stand
NOTE:
• Unplug the AC cord.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
Place the TV on its front onto a table.
Align the stand's bottom-plate (supplied) as seen here that hold the unit with stand frame by 3 screws.
It will t in only one direction.
Hold the unit and attach as shown in Figure 1.
(a)
Figure 1
Finally, secure the bottom-plate (a) with 4 screws (supplied) (4x16mm (5/32x5/8 inches)) as indicated by the arrows in Figure 2.
•
Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and
could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack at against the back of the unit in the carton. To remove the stand,
perform the above steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 3 screws from the back.
NOTE:
•
Before wall-mounting, please check carefully the location of the TV's mounting-holes.
J3PB0321A_EN.indd 7
All manuals and user guides at all-guides.com
LCD PANEL FRONT
Figure 2
Screws
(a)
7 EN
7/9/12 9:40:36 AM
Publicidad
