Publicidad
Installation
regulations.
Once the Crepe Griddle has been placed in position by consulting International Standards and regulations.
Cleaning the cast iron plate thoroughly is advised. Warm up the cast iron plate for 3-5 minutes, Unplug the unit,
then use warm, soapy water to clean, After cleaning ,The Crepe Griddle is ready to operate.
Before first use,please warm up the unit for 10 minutes until all smoke and/or odor has dissipated.
Operation
Plug in the unit, the red light is on, prior to allow the cooking surface to warm up about 5 minutes.
Turn the thermostat dial to the required setting and cook. The green light will be extinct once temperature
is reached. General cooking temperature is between 180°C and 200°C. When not cooking, Turn off the
thermostat and unplug the unit.
Maintenance
The Crepe Griddle should be cleaned using warm, soapy water after each day's operation.
For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold water on warm
plate.
Do not immerse completely in water to clean.
The appliance is not to be cleaned with a water jet.
Troubleshooting
If the Crepe Griddle does not work, please check the following:
1. The power supply is correct and the red light on.
2. The thermostat is correct.
3. The element is clear.
6
Publicidad
