Imetec P9402 Instrucciones De Uso página 16

• Connect the power cable to the mains.
Switch the styler on by sliding the on/off button (2) to the left to the
desired temperature from those indicated below:
- Temperature 1: 160°C
EN
- Temperature 2: 180°C
- Temperature 3: 200°C
A LED next to it lights up and flashes until the selected temperature
is reached.
• Use one hand to pull the lock of hair, insert it between the heated parts
(1 or 7 and 8), close the product and hold it pressed for a few seconds.
Repeat the styling operation along the entire length of the hair.
• After hair styling has been completed, switch the appliance off by
sliding the button (2) right to 0 and disconnect it from the socket.
• Wait for the appliance to cool down.
• Before storing the appliance away, insert the support base on the
heating element (1 or 7) as protection cover.
• Use the specific closing lock (4) to close and store the styler.
o n .
• Disconnect the appliance from the mains.
• Make sure the appliance is cool.
• Clean the external and internal surfaces of the heated parts (8)
and the handle of the appliance using a soft and damp cloth.
• Let it dry completely before switching it on again.
3000_P9402.indd 14
ATTENTION! Every time you need
to place the appliance down during
styling operations, house it in the
suitable support base [Fig. C]
MAINTENANCE AND CLEANING
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
STORAGE
WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
14
09/04/18 22