Dsd Output Setting; Network Display Setting; Automatic Display Darkening Setting; Automatic Power Saving Setting - Esoteric N-03T Manual Del Usuario

DSD output setting

DSD>***
o This is only activated when the output connector setting is XLR or
RCA.
o By default, the setting is DoP.
DoP
DSD data is output in DoP format.
PCM
DSD data is converted to PCM and output.

Network display setting

DISP>***
o By default, the setting is Fs.
Fs
This shows the sampling frequency being input.
If there is no input signal or the unit is not locked to the input sig-
nal, the input sampling frequency is not shown.
TIME
This shows the elapsed time of the song being played.

Automatic display darkening setting

DPaOFF>***
o By default, the setting is ON.
You can set the display to darken automatically after a set amount of
time has elapsed.
ON
The display will automatically darken if the information shown on
it does not change for 10 minutes.
OFF
The display will not automatically darken, but if nothing changes
for 10 minutes, its brightness will be lowered to the level of
DIMMER>1 to reduce long-term display fading.
o We recommend that you set the automatic display darkening
function to ON. If the display is left showing the same thing for a
long time, brightness irregularities and other problems could arise.

Automatic power saving setting

APS>***
o By default, the setting is 30m.
The unit will automatically turn off if playback remains stopped for
the set amount of time.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.

Dimmer setting

DIMMER>***
o By default, the setting is 2.
You can adjust the brightness of this unit's display and indicators.
DIMMER>3
c
DIMMER>2 (normal brightness)
c
DIMMER>1
c
DIMMER>0 (off )
o The dimmer of this unit can be adjusted using the DIMMER button
of a remote control included with another ESOTERIC product.
o Even when set to DIMMER>1 or DIMMER>0, a brighter setting will
be used when displaying error messages and setting menus.
13