STEP 4 Leveling your washer
B
WA3400T_DC68-03850E-04_EN.indd 25
WA3400T_DC68-03850E-04_EN.indd 25
A
C
See if the washer is level by checking the
position of the tub:
1. Slide the washer into position.
2. Open the lid of the washer, and pour
the water into the tub to just below the
pulsator level.
3. If the washer is level, the pulsator (A) is
positioned at the center of the water as
shown in the figure.
If not, level your washer by turning
the front leveling feet clockwise or
counterclockwise as necessary.
NOTE
Turn the front leveling feet clockwise (B) to
lower the washer, and counterclockwise (C)
to raise the washer.
English 25
2021-01-29
2021-01-29
12:42:31
12:42:31