Publicidad
Idiomas disponibles
Idiomas disponibles
Application examples/selecting a suitable tool
Function
Drilling
Milling
Engraving
Polishing, rust removal
CAUTION! Exert only
a light pressure when
applying the tool to the
workpiece .
Cleaning
Grinding
Cutting
■
Note that the maximum diameter of the
grinding assembly and of grinding cones, pencil
grinders and grinding points with a thread insert
may not exceed 55 mm and the maximum
diameter for sandpaper sanding accessories
may not exceed 80 mm .
NOTE
►
The max . permissible length of a mandrel is
33 mm .
■
Store the accessories in the original box or store
the accessory components somewhere else to
protect them from damage .
PFBS 160 B2
Accessories
Drill bit
Milling bits
Engraving bits
Metal brush
Polishing
attachments
Synthetic brushes
Grinding discs
Grinding bits
Abrasive belts
Cutting discs
Use
Working wood
Various jobs; e .g . creating
recesses, hollows, forms, grooves
or slits
Labelling, handicrafts
rust removal
Various metals and plastics, espe-
cially precious metals such as gold
and silver
e .g . cleaning hard-to-access
plastic housings or the area
around a door lock
Grinding work on stone, wood,
fine work on hard materials such
as ceramics or alloyed steel
Working metal, plastic and wood
■
Store the accessories somewhere dry and not
in the vicinity of aggressive media .
■
If you exert too much pressure, the fitted tool
can break and/or the workpiece could be
damaged .
You will achieve optimum working results by
moving the tool over the workpiece at a steady
speed
and while exerting light pressure .
■
When carrying out cutting work, hold the appli-
ance firmly with both hands .
■
Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool .
Protrusion
(min–max) mm
18–25, using the
smallest drill, the
protrusion is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
10
12–18
GB │ MT
│
65
■
Publicidad
