Publicidad
Idiomas disponibles
Idiomas disponibles
Suspected malfunctions are often due to causes that the users can fix
themselves. Therefore check the product using this section. In most
cases the problem can be solved quickly.
Problems
Not connected to power supply
Product does not
Power cord or plug is defective
start
Other electrical defect to the
product
Extension cord not suitable for
operation with this product
Product does not
Power source (e.g. generator)
reach full power
has too low voltage
Air vents are blocked
Saw chain not tensioned
Unsatisfactory
properly
cutting
performance
Blunt saw chain
Saw chain is dull/damaged
Excessive
vibration/noise
Bolts/nuts are loosen
Possible cause
237
5.TROUBLESHOOTING
Solution
Connect to power supply
Check by a specialist electrician
Check by a specialist electrician
Use a proper extension cord
Connect to another power source
Clean the air vents
Tighten properly
Sharpen or replace the saw chain
Replace with a new one
Tighten bolts/nuts
EN
Publicidad
