camry CR 2313 Manual De Uso página 4

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use a hair curling iron in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using
sharp objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After use, turn off and unplug the unit. Wait until the device cools down before storing.
34.During the operation ceramic plates heat up to high temperatures. Do not touch hot
parts of the hair curling iron and do not allow contact with the skin of the head, because it
may cause burns
35. The device is not designed to work with external schedulers or separate remote control
system.
DESCRIPTION OF THE DEVICE
1. Display
3. heating tiles
USING THE DEVICE
To achieve the best results in hair straightening, use a device on washed.
1. Insert the plug into the socket.
2. Turn the switch device 4 (hold the button per 3 second).
3. Device will turn on, then display will show 180 °C
4, Use the button 5 to change temperature „+" (max. 230 °C ) or „-" (min. 100 °C)
5. Press ON-OFF key first, then press the "+" or "- "switch to get the new temp. you want.
6. Move slowly away from the roots to the ends of hair.
NOTE: The unit is hot during operation. one should exercise caution
7. Repeat until all the hair bands will be stretched.
8. After finishing work, turn off the power button straightener (4), then unplug the power cord from the outlet.
CLEANING
1. Before cleaning, remove the plug from the socket and wait until device cool down.
2. The casing should be cleaned with a damp cloth. Do not submerge in water or other liquids.
3. Do not wind the power cable to the device.
2. Handle
4. On/Off switch 5. buttons of temperature regulation
4