Machine Noise; Electrical System Compliance; Packing; Checks To Be Made After Unpacking - Luxia POLY 1000 Manual De Uso Y Mantenimiento

The continuous, equivalent, weighted acustic radiation pressure level A for the operator, working in front,
is lower than 70 dB.
Measurements were made at a distance of 1 m from the machine and a height of 1.60 m above ground.

6 - ELECTRICAL SYSTEM COMPLIANCE

The machine electrics comply with UNI EN 60204/1 and CEI 44/5 regulations.
POLY is delivered in one single cardboard pack with pallet.
Model Size (mm)
A
POLY 1000 850 730 1490
POLY 1500 850 730 1490
POLY 2000 850 730 1490
8 - CHECKS TO CARRY OUT AFTER UNPACKING
The machine is assembled and tested in the factory.
• Check that pack contents have not been damaged.
• Find the EEC marking plate.
• Find the machine data plate.
• Check that all accessories are there (overflow pipe, baskets, etc.).
If in doubt do not use the machine and ask qualified personnel or your dealer for advice.
No packaging material (cardboard, plastic bags, polysterene etc.) must be left within children reach, as
they are potentially hazardous.
All packaging materials must also be stored and disposed of according to current in force regulations.
NOTE: Any optional accessory is delivered separately.
STORAGE CONDITIONS
If the machine is not put to use, it must be kept inside its packing in a weather protected, and dry
environment.
The package must be kept upright, and a maximum of two packages can be put one on top of the other.
NOTE: If the machine is not being used for a long period of time, drain any water from
the tank and dry up carefully all machine surfaces.
pag. 32 di 132

5 - MACHINE NOISE

7 - PACKING

Gross weight
B C kg
116
116
118

9 - STORAGE

POLY 1000/1500/2000
A
Operating and service manual
English
C
B