Yorbay KM1400 Manual De Instrucciones página 39

Usage precautions and safety warnings
1. Sensitivity adjustment and delay adjustment Weld mask
working visual impact, be sure to according to their own
welding habits, fine-tuning in place.
2. Before and after the filter must be equipped with protective
film, otherwise it will damage the filter.
3. In case of welding mask shell and the LCD screen is
damaged, please stop using this product and contact the
vendor for processing.
4. Protective sheet broken or scratched to be replaced,
replace the hard objects to avoid contact with the filter lens,
pay attention to the use of original protection back to better
match with the product.
5. In high-temperature environment, easy to sweat the welding
operation, it is recommended to change the sweat-absorbent
zone to maintain clean and comfortable.
6. Please wear well before welding fire-retardant clothes
special protection, gloves, foot care, safety boots and other
protective equipment, away from combustibles
7. To avoid welding fumes and harmful gases hazardous to
health, wear respiratory protection
8. Wear this product need to check whether the mask all
wrapped hair, to avoid the hair exposed outside the mask
36