Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE DEVICE
1. Water inlet opening
3. Washing chamber lid
5. Washing chamber
7. Water supply hose
9. Spin basket
PREPARATION OF THE APPLIANCE
1. The washing machine should be placed on a stable and flat surface (the maximum permissible inclination angle is 2°, in other case
the washing machine should be moved to a different place). To avoid noise while operating, the distance between the washing machine
and the wall must be larger than 5cm. The ventilation holes on bottom of the device's housing must not be covered with a rug.
WASHING
1. Before washing, check whether the drain hose (6 ) is in the top position to prevent water outflow .Connect the hose to the water tap.
Open the lid of the washing chamber (3). Remove the centrifuge basket (9) by turning it to the right. Empty pockets of clothes. Insert
the clothes to the washing chamber (5). Fill the washing machine with hot water with temperature of not more than 50 ° C to the upper
limit of the scale. Water may also be poured by the machine lid (3). Add appropriate amount of washing powder. Close the cover (3).
2. Connect the machine to a grounded power outlet. Set the washing machine timer (2) on the desired time by turning the knob to the
right. Washing starts. If you want to interrupt the program before the end of the set time, turn the timer to the left to switch of f the
machine and remove mains plug with dry hand.
3. After finish of washing let the dirty water leave the washing machine using drain hose (6) and putting it into drains or capacious
vessel.
SPINING
1. In order to spin washed clothes mount the spin basket ( 9) to the bottom of the washing chamber (5) by turning it clockwise. Put
washed and rinsed clothes into the spin basket (9). Close the protective cover (8). Close the lid of the washing machine ( 3). Set the
spin time by turning the timer (4) to the right. Spinning can be stopped by turning the timer (4) to the left to position 0. Hose (7) is used
to connect the water inlet opening (1) with a tap.
CLEANING AND MAINTENANCE
1.Disconnect the plug from the socket and leave the washing machine to cool.
2. Wipe the lids and the outside of the washing machine with a damp cloth or a sponge with a small amount of dishwashing liquid.
3. Do not clean with steel wool or caustic agents.
4. Wipe the inner part of the tub dry.
TECHNICAL DATA
Supply voltage:
220-240V ~ 50/60Hz
Power:
150W
Washing capacity:
3kg
Spin capacity:
1kg
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 220-240 V ~50/60Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden.
3. Wegen Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
4.Falls sich Kinder in der Nähe befinden, sollte bei der Nutzung des Gerätes spezielle
Max:400W/580W
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
2. Washing timer
4. Spin timer
6. Drain hose
8. Protective cover
DEUTSCH
4
Publicidad
