Removing A P2 Card; Write-Protecting A P2 Card - Panasonic AU-XPD1 Instrucciones De Funcionamiento

Removing a P2 Card

1
Flip up the EJECT button in the
direction of the arrow.
2
Press the EJECT button.
The P2 card will slide out far enough to
allow you to remove it.
◆ NOTE:
• To remove a P2 card on a Mac, drag the P2 card icon to the Trash. Then check
that the icon has disappeared and the access indicator on the P2 drive has
turned off before physically removing the P2 card.
• Do not remove a P2 card that is being accessed. Removing a P2 card during
access may cause the P2 drive to malfunction. Should this happen, reconnect
the two USB cables.

Write-protecting a P2 Card

A P2 card has a write-protect switch.
Setting this switch to "PROTECT" can
prevent writing and deleting of data.
Note: The write-protect switch is not
effective when the P2 card is inserted in
the P2 drive. Make sure you remove the
P2 card from the P2 drive, set the switch,
then re-insert the card, in order to effect
the switch setting.
To prevent the writing and deleting of data
when using a Memory Card Adapter (AJ-
P2AD1), set the memory card write-protect
switch on the adapter.
E-11
EJECT button
P2 card
PROTECT
Write-protect
switch