Warning:
anD OPEraTing inSTrUCTiOnS BEFOrE USing THiS EQUiPMEnT. Failure
to follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY:
Keep your work area clean and well lit
•
accidents.
Do not operate power tools in explosive atmospheres
•
presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust
or fumes.
Keep bystanders, children, and visitors away while operating a power
•
tool
. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet.
•
use any adapter plugs in any earthed (grounded) power tools. Double insulated tools are equipped
with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double
insulation eliminates the need for the three wire grounded power cord and grounded power supply
system.
• Do not expose power tools to rain or wet conditions.
tool will increase the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
your body is grounded.
• Do not abuse the cord.
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk
of electric shock.
• When operating a power tool outside, use an extension cord suitable
for outdoor use.
• Do not use AC only rated tools with a DC power supply.
appear to work. The electrical components of the AC rated tool are likely to fail and rate a hazard to
the operator.
PERSONAL SAFETY
Stay alert,
•
watch what you are doing and use common sense when operating a power tool.
Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• Use safety equipment.
mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions will reduce
personal injuries.
• Dress properly.
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air
vents may cover moving parts and should be avoided.
rEaD anD UnDErSTanD aLL WarningS, CaUTiOnS
Never use the cord for carrying, pulling or unplugging the power
These cords are rated for outdoor use and reduce the risk of electric shock.
Always wear eye protection. Safety equipment such as dust
Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
. Cluttered benches and dark areas invite
Never modify the plug in any way. Do not
There is an increased risk of electric shock if
, such as in the
Water entering a power
While the tool may
3