Pump filter
It is advisable to clean the pump filter every 2 months to prevent its clogging. A clogged pump filter may
reduce the bubble effect.
NOTE
• The "Clean drain filter" message appears on the control panel display after every 100 washes.
• If the pump filter is clogged, an information code of "Clean drain filter" appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational
failure or a leak.
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 51
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 51
1. Turn off the washer, and unplug the power cord.
2. Drain the remaining water inside the drum. See the
Emergency drain section.
3. Open the filter cover.
4. Turn the pump filter knob to the left, and drain off
the remaining water.
5. Clean the pump filter using soft brushes. Make
sure the drain pump propeller inside the filter is
unclogged.
6. Reinsert the pump filter, and turn the filter knob to
the right.
NOTE
• Some pump filters feature a safety knob that is
designed to prevent accidents by children. To open
the safety knob of the pump filter, push in and turn
it anticlockwise. The spring mechanism of the safety
knob helps open the filter.
• To close the safety knob of the pump filter, turn it
clockwise. The spring makes a rattling sound, which
is normal.
English 51
2023/6/27 18:56:31
2023/6/27 18:56:31