Costway SY10001 Manual Del Usuario página 4

PREPARATION
Serach coil
Lock Knob
STEP 1. Your detector requires no assembly or tools. Simply removes
the detector from the box.
STEP 2. Turn the detector 180 degree as shown in the figure.
Tum
06
SET UP
Connecting rod 2
Control panel
Connecting rod lock
Connecting rod 1
The control box
Armrest strap
Armrest
Remove the fixing strap
STEP 3. Press down the UNLOCK button to release the handle.
Press the lock button
Open the
controller
and handle
STEP 4. Slide out the armrest to the desired length (typically just
under your elbow). And fully extend the lower shaft to the desired
length for your height.
Open
Pull to the
desired position
BATTERY
Please use two 9V alkaline battery.
Open the battery cover and install
the battery according to the polarity
sign in the battery box. If you are
not going to use the detector for a
long time, please remove the
battery from the battery case.
Open
Pull to the
desired position
07