System Requirements - i-tec U3HUBMETAL7 Manual De Instrucciones

Quick Start / USB 3.0 Metal Charging HUB 7 Port
DESCRIPTION
1. Input for connecting the power adaptor
2. 1x input USB 3.0 port type A for connecting to a notebook / PC
3. 7x output USB 3.0 ports for connecting USB equipment
4. LED diode – the diode is ON when the HUB is connected to the power
adaptor or to a USB port of a notebook / PC
CHARGING
You can use external power adapter, if you connect printer, scanner or other
high power consumption devices to USB ports in HUB (power adapter is
included). Respect the basic rules while using this power adapter (for ex.
do not let in reach of children, if the adapter is in 230 V circuit, do not put it
into the water and so on).
CHARGING
The HUB supports charging of the connected USB mobile equipment such
as smartphones (including iPhone and Samsung phones), e-book readers,
multi-media players, GPS navigators, and tablets (e.g., Asus, Toshiba,
GoClever, Prestigio, Emgeton, Sencor). The HUB does not support charging
of iPad and Samsung tablets which require special identification circuits.
Using the original cable connect the equipment to be charged to the USB
port of the HUB. At the same time the power adaptor needs to be connected
to the HUB as well.

SYSTEM REQUIREMENTS

Hardware requirements
Notebook / PC with one available USB port
Operating system
Windows 7 / 8 / 8.1 / 10 32/64bit, macOS X 10.x or higher
SPECIFICATION
• 7x USB 3.0 port for connecting USB equipment
• 1x USB 3.0 port for connecting the HUB to a notebook / PC
• Transfer rate up to 5 Gbps
• USB charging detection mechanism for mobile devices
• Plug & Play function
• Overload and overcurrent protection
• LED diode
• Storage temperature: -10~85 °C
• Working temperature: 0-40 °C
• Power adapter: input AC 100-240 V, 50-60 Hz, 0.8 A; output DC 12 V,
2.5 A
EN
7