Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
How to use
Before use
Clean the appliance with warm water and detergent and dry it with a cloth.
Electronic control
The electronic control of the refrigeration temperature is done by the control unit and the temperature
sensor; The control unit is located at the back of the appliance; The display panel is located in the upper
compartment of the refrigerator and is illuminated by an LED light.
1. Control panel: It includes a switching power supply model with output loads, including compressor,
heater, motor and LED light, etc., and input loads, including sensor, refrigerator defrost sensor, and indi-
cation buttons.
2. In spring and autumn the temperature ranges from 16-35 °C. With the SET button, the temperature can
be set to 4 or 6 speeds, the air quantity control can be set to the middle position.
3. In summer especially, the temperature is above 35 °C, the temperature is set to speed 2, and the air
volume control lever is set to maximum.
4. In winter (16 °C and below) to adjust the temperature, the air volume control lever is set to the middle
position between minimum and preferably to the minimum or near minimum position.
FAST COOL
When you need to cool down hot food quickly, you can activate the "FAST COOL" button.
Note: After 2-3 hours, the refrigerator will automatically adjust to the previous operation of the range at
the end of the "FAST COOL" function.
The cycles of the temperature modes are as follows:
"5-->4-->3-->2-->1-->FAST COOL-->5"
Coldest
Cold
5
It is used when the user needs the col-
dest temperature.
4
3
For normal use
2
Used when the user does not need a very
cold temperature.
1
31
English
milectric.com
Publicidad
