GE UUY36ZGDAB Instrucciones De Instalación página 6

Overview
• It is the responsibility of the installer to ensure all
aspects of the installation for this product adhere to
national, state, and local codes.
• Every possible system difference or work site
abnormality cannot be addressed in this manual. If
questions arise, it is the obligation of the installer to
contact the distributor or supplier of this product for
assistance.
• To ensure proper performance, the duct system
pressure drop should never exceed the static pressure
capacity of the blower.
• Only use and apply accessory heater components that
are approved in this manual.
• All work should be performed by persons trained,
experienced, and licensed in the mechanical and
electrical fields.
• The manufacturer will not be responsible for equipment
that is under-performing due to a failure to follow the
instructions in this manual or best industry practices.
• The manufacturer has the right to revise this manual
without notice.
1. No person should operate, maintain, or service this
equipment unless suitably trained by an industry
professional.
2. Disconnect unit from the power supply if it not to be used
for an extended period.
3. Be certain that you have selected the proper model
for the operating load. Improper selection may impact
operating performance.
4. Please do not disassemble the unit without proper
training. This equipment has undergone strict inspection
and operational testing at the factory.
5. For technical assistance, please contact GE Appliances
technical support
Accessories
Part
Owner's Manual
6
6. If the product is malfunctioning and/or is inoperable,
please contact GE Appliances technical support. Provide
the following information:
a. Product Nameplate data (model number, cooling /
b. Nature of Malfunction (specify the circumstances before
7. All illustrations and information in the instruction manual
are for reference only. We retain the right to make
necessary revisions to the product from time to time.
8. GE Appliances assumes no responsibility for personal
injury, property loss or equipment damage caused by
improper installation and commissioning, unecessary
maintenance, or failure to follow relevant federal and state
regulations, industry standards, and the requirements of
this instuction manual.
9. GE Appliances will bear no responsibilities for personal
injury or property damage caused by the following:
a. Improper use of the appliance
b. Altering, maintaining, or operating the product with non-
c. Altering, maintaining, or operating the product outside
d. Defects caused by corrosive gas.
e. Defects caused by shipping damage.
f. Failure to abide by this instruction manual or
g. Products made by other manufacturers
h. Natural disasters, improper installation environment, or
Looks Like
Owner's
Manual
heating capacity, product serial number, factory date)
and after the error occurred)
approved equipment.
of the guidelines of this manual.
government regulations.
force majeure.
Quantity
1
31-5000710 Rev. 2