brennenstuhl PIR 110 Instrucciones De Empleo página 15

011409 Bewegungsmelder PIR 110_180_011409 BA_Bewegun
PIR 110/180
SETTING THE RESPONSE SENSITIVITY:
The motion detector has a built-in sensor that
can differentiate between daylight and dark-
ness.
The () position indicates that the attached
light will be activated by the motion detector
during daytime or nighttime. The () position
indicates that the attached light will only be
activated by the motion detector at night.
You can select the intensity of the light by
which the light shall activate using the LUX-
selector dial.
SETTING THE LIGHT DURATION:
The light duration is the amount of time for
which the motion detector leaves the light on
after activation. The light duration can be set
for 10 seconds to 4 minutes. By turning the
TIME-dial from (+) to (-), the light duration is
reduced.
Note: Every time motion is detected, this time
period starts all over again.
15