Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2 Flooring
<Back>
NOTE
If the refrigerator cannot pass through the entrance due to its size, see the Door removal
for entrance section in the Installation chapter.
RF48_UM_Rev00_EF_EN.indd 39
Spacer
NOTE
Remove paper on spacer and then attach
a spacer (Gray block) on the back side of
refrigerator for better performance. Make
sure a spacer fix like above image when
you install the refrigerator. It is improving
the refrigerator performance.
If You set the refrigerator in furniture, the
spacer should be removed for the door-
flushing with furniture.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
English 39
2023-03-17( )
10:51:08
Publicidad
