ARENDO 20191018FS027 Manual Del Usuario página 23

Make sure that the control elements are clean and dry and that
they are not covered by any objects (e.g., a utensil or cloth). Even a
thin film of water can make the operation difficult.
6. Initial use
1. Make sure the air vents are not blocked and keep the dishes
away from the ceramic plate.
2. Make sure that the pot or pan in which the food or liquid is
present is placed in the centre of the ceramic plate.
3. You will hear a beep after the power supply is connected. "L" is
shown on the display. The appliance is now in standby mode.
4. Press the "ON/OFF" button. The inductor cooker switches on.
Press the "Function" button to change the induction cooker to
heating mode.
5. After pressing the "ON/OFF" button, the induction cooker
switches off automatically if a "Function" button is not pressed
for 10 seconds.
6. If a suitable pot is not present on the ceramic plate after press-
ing the "Function" button, the induction cooker does not heat
up. An audible alarm indicates that a pot is needed. A minute
later, it switches off automatically.
7. Temperature setting
1. After switching on the induction cooker, press the "Function"
button to access the "Temperature" or "Power levels" mode.
2. You can adjust the power level by pressing the "+" or "-" but-
tons.
3. You can adjust the temperature by pressing the "+" or "-" but-
tons.
English
23