Product data sheet
2/6
Type
Setting
range
TUC105F001
15...95 °C
TUC106F001
40...120 °C
TUC107F001
50...130 °C
TUC108F001
80...160 °C
TUC207F003
70...130 °C
TUC303F001
15...60 °C
TUC307F001
50...130 °C
TUC407F001
95...130 °C
TUC407F002
95...130 °C
A
With TUC407F001, TUC407F002 and TUC207F003, only use the supplied thermowells or stainless-steel
thermowells (part nos.: 0393022*** or 0392022***).
A
TUC108 with adapter for temperature reduction, only use the supplied thermowell.
Accessories
Type
Description
0300360008
Retaining holder for cable temperature sensor or capillary tube with 0392022*** (LW 7) or LW
15 (10 pcs)
0300360009
Holder for sensor cartridge
0300360010
Retaining strap for fitting onto pipes for a pipe diameter of 15-100 mm
0300360011
Mounting plate for double thermostats
0300360012
Sensor support spiral for fitting in ventilation duct
0300360013
Duct/wall mounting bracket
Description of operation
This universal thermostat regulates and monitors the temperature of liquids or air in baths, containers,
pipes and ducts.
Definitions and functions
Depending on the temperature, the single-pole change-over switch is activated.
Setpoint (X
)
s
The setpoint (X
), which can be adjusted, corresponds to the upper change-over point.
s
Switching difference (X
)
sd
The switching difference (X
sd
point. It is set to a fixed value for all TUC models (see type description).
Temperature monitor (TW)
The temperature setpoint can only be adjusted with the aid of a tool. The set temperature is switched
on and off automatically.
Safety temperature monitor (STW)
The STW has the same functions as the TW, but the contact switches to the safe side if a capillary
tube is broken.
5.1
Type
Switching
Capillary
difference
tube length
TW
Approx. 5.6
0.7 m
K
TW
Approx. 5.6
0.7 m
K
TW
Approx. 5.6
0.7 m
K
TW
Approx. 5.6
0.7 m
K
STW
Approx. 10
1.6 m
K
TB
≤ 20 K
0.7 m
TB
≤ 20 K
0.7 m
STB
≤ 20 K
0.7 m
STB
≤ 20 K
0.7 m
) is equal to the difference between the upper and lower change-over
Right of amendment reserved © 2018 Fr. Sauter AG
Sensor car-
Thermowell Max. sensor
tridge length
temp.
(± 12 mm)
65 mm
100 mm,
200 °C
brass
65 mm
100 mm,
200 °C
brass
65 mm
100 mm,
200 °C
brass
65 mm
100 mm,
200 °C
stainless
steel
60 mm
100 mm,
160 °C
brass
70 mm
100 mm,
200 °C
brass
65 mm
100 mm,
200 °C
brass
76 mm
100 mm,
160 °C
brass
76 mm
150 mm,
160 °C
brass
21.700