Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
ELECTRIC SHOCK DUE TO
DEFECTIVE INDUCTION HOB!
The induction hob cannot be switched
off.
Switch off or unscrew the
household fuse immediately and
call After Sales Service.
Do not carry out repairs on the
appliance yourself.
Suitable cookware
The cooking surface and the
bottom of the pot or pan must
always be clean and dry.
Pots and pans with a flawless,
smooth bottom.
Heat-resistant cookware, follow
manufacturer's instructions.
Do not use pots made of plastic or
whose inside is coated with
aluminium.
ATTENTION
Damage to the induction hob due to
rough pot bottoms.
Use only undamaged cookware.
Cleaning the induction hob
after each use
3. Wipe the induction hob with a
damp cloth and a little washing-
up liquid.
4. Wipe the induction hob dry with a
clean cloth.
5. Remove any splashes of food or
grease immediately.
6. For further cleaning instructions,
see chapter Cleaning and
Maintenance.
Switching the hob on/off
1. Plug in the mains power cable of
the appliance.
à Display lights up for 2 seconds.
2. Place a pot or pan on the hob and
press the "On/Off" button.
à The display indicates "On" and
goes into standby mode.
3. Press the "On/Off" button again
to switch o ffthe appliance.
à The appliance switches off.
If no setting is made for 30 seconds in
standby mode, the appliance switches off
automatically.
Setting the power level:
There are two ways to set the power:
Option 1
1. When the appliance is in standby
mode, press the "Power/Temp"
button.
à The display shows "P5", which
means that the appliance is
operating at power level 5.
2. Set the power level by turning the
"temperature regulator".
Option 2
1. When the appliance is in standby
mode, turn the "temperature
regulator" clockwise.
à The display shows "P5", which
means that the appliance is
operating at power level 5.
2. Set the power level by turning the
"temperature regulator".
Setting the temperature:
1. When the appliance is in standby
mode, press the "Power/Temp"
button twice.
à The display shows "t5", which
means that the appliance is
operating at temperature level 5.
2. Set the temperature level by
turning the "temperature
regulator".
For safety reasons, the appliance
switches o ffautomatically after two
hours if no timer is set.
EN
Page | 17
Publicidad
