Publicidad
Idiomas disponibles
Idiomas disponibles
User Guide
9. Glossary
RCD
HVU
Burner
Tracer
Connection coupling
Screen
Conductor
10. Ordering information
For safety reasons do only use replacements delivered from Danfoss A/S according to the table below.
Item no.
12609001
Magnetic tracer on crutch for DEVItector™ II V2
12609002
DEVItector™ II V2 High Voltage Unit (Burner) with Magnetic tracer - Hand held
BC421332622232es-ES0101
DEVItector™ II V2
Residual Current Device.
An electronic device normally located in the electric supply branch of a building.
It monitors the difference between in-going and outgoing current and if this
difference exceeds a threshold, say 30mA, it will cut off the mains supply.
High Voltage Unit, also known as the burner.
The HVU of the DEVItector™ II V2 equipment.
An electromagnetical sensor which transform a magnetic flux into an acoustic
signal. The amplitude indicates the proximity to the heating cable.
The electric connection between the conductive (cold) and resistive (warm) parts
of a complete heating cable.
Electrical shielding surrounding the live parts of the heating cable. The screen may
be realized as twisted wires or a wrapped foil.
Common term for either a heating wire or the screen
Description
EAN no.
5703465026602
5703466111352
2022.07 | FEC | ©Danfoss | 27
Publicidad
