Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTAINING A BATTERY
The SE-1-12S-CA maintains both 6 and 12 volt batteries, keeping them at full charge.
NOTE: The maintain mode technology allows you to safely charge and maintain a
healthy battery for extended periods of time. However, problems with the battery,
electrical problems in the vehicle, improper connections or other unanticipated
conditions could cause excessive current draws. As such, occasionally monitoring
your battery and the charging process is recommended.
13. MAINTENANCE AND CARE
A minimal amount of care can keep your battery charger working properly for years.
• Clean the clamps each time you are finished charging. Wipe off any battery fluid
that may have come in contact with the ring terminals, to prevent corrosion.
• Occasionally cleaning the case of the charger with a soft cloth will keep the
finish shiny and help prevent corrosion.
• Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
• Store the charger unplugged from the AC power outlet in an upright position.
• Store inside, in a cool, dry place. Do not store the ring terminals on or around
metal or clipped to the cables.
14. TROUBLESHOOTING
PROBLEM
Battery ring terminals
do not spark when
touched together.
Both LEDs come on
for 2 seconds, then
turn off.
POSSIBLE CAUSE
The charger is equipped with
an auto-start feature. It will not
supply current to the battery
ring terminals until a battery
is properly connected. The
ring terminals will not spark if
touched together.
The charger is plugged into an
AC outlet.
• 12 •
REASON/SOLUTION
No problem; this is a
normal condition.
No problem; this is normal.
Publicidad
