QFX PBX-2008-1 Manual página 3

PBX-2008-1
PBX-2008-1 REAR PANEL
4
1 3 5
2 6
7
8
12 11 10 9
13
1. Master Level Control: Turn this knob to adjust the master volume.
2. Treble adjustment: Turn this knob to increase the treble on the LINE/USB/SD/FM inputs
3. Bass adjustment: Turn this knob to increase the bass on the LINE/USB/SD/FM inputs
4. Microphone Echo Knob: Use this knob to adjust the echo for the microphone input.
5. Microphone Volume Knob: Turn this knob to adjust the microphone volume level of the
microphone input.
6. Wireless Microphone Volume Knob: Turn this knob to adjust the microphone volume level
of the wireless microphone input.
7. LINE1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any
other stereo level audio device.
Please note that there are two LINE Inputs, RCA and 1/8". If both the RCA and 1/8"inputs are
connected the unit is automatically play from the 1/8" Line input. To play from the RCA Line
input, please disconnect the 1/8" connection from the 1/8" Line Input.
8. Microphone Input(1/4"): Connect a microphone to this microphone input terminal.
9. LINE2 Input(1/8"): The 1/8" Line Input is designed to connect directly to a mp3 player or any
other stereo level audio device. Please note that there are two LINE Inputs, RCA and 1/8". If both
the RCA and 1/8"inputs are connected the unit is automatically play from the 1/8" Line input.
10. Charge Indicator: When you are charging the battery, the charge indicator will illuminate RED.
Once fully charged the indicator will illuminate orange. The low Battery indicator will illuminate
GREEN.
11. Power Switch: There are three possible settings. Setting the unit to DC will allow the unit to
play using only internal battery. If the unit's battery is not charged, you can set the unit to AC. In
this setting the unit will still charge, but it will do very slowly. To charge the unit properly, set the
unit to OFF.
12. Power Supply: The power switch should be set to the off position before the power supply is
connected.
13. 3.DC 12V IN is for connecting to 12V external battery if needed.
-2-