Publicidad
Idiomas disponibles
Idiomas disponibles
1. Prepare the Site
CAUTION: Risk of property damage. To properly support the weight of the vanity and vanity top/sink, secure to
stud framing or 2x8 support behind the finished wall.
NOTICE: To verify proper support and alignment: The finished wall must be straight and plumb. The floor must be flat
and perpendicular to the finished wall.
Install the vanity to all studs behind the wall, spaced 16" (406 mm) apart. A stud must be located a maximum of 3"
(76 mm) from each side of the vanity. A distance greater than 3" (76 mm) requires 2x8 support to be installed behind
the finished wall.
If installing 2x8 support, install 2x8s between the wall studs at the desired vanity location. The height from the finished
floor to the top of the 2x8 support should be 34-1/2" (876 mm) and flush with the front of the wall studs.
Plan for routing supply and drain piping for your desired sink installation.
Complete the finished wall.
1533267-2-A
2x8 Support
4
34-1/2"
(876 mm)
Kohler Co.
Publicidad
