Melissa 16390057 Manual Del Usuario página 30

ADJUSTING THE
TEMPERATURE
• Read any ironing instructions on the
garment. As a rule, there will be a
pictogram of an iron and a number of
dots. These dots indicate the setting
that should be selected on the iron
(see table below).
• If there are no ironing instructions
on the garment, but you know what
fabric it is made of, the table below
can be used. The table only applies
to the relevant material and is for
guidance only.
Symbol Fabric
Synthetic
materials
Silk, wool
Cotton, linen
Do not iron
• Garments with printed and sewn-
on features are best ironed on
the reverse of the material at low
temperature.
• For fabrics made of several different
materials, you should always adjust
the temperature to suit the material
that can tolerate the least heat. If, for
instance, a product consists of 60%
polyester and 40% cotton, adjust
the temperature of the appliance for
ironing polyester.
UK
• Sort the items to be ironed according
to the temperature at which they are
to be ironed.
• The iron will get hot quicker than it
cools down. Therefore always start
with garments to be ironed at the
lowest temperature.
REFILLING THE WATER
Note! This appliance has a built-in
maintenance free anti-calc filter sys-
tem. Only fill the water reservoir with
tap water. If you fill the water reservoir
with distilled/demineralised water,
chemical additives, scented substanc-
es or decalcifiers, the anti-calc system
Temperature
will be damaged.
Low
• Unplug the appliance.
• Set the steam adjustment button (3)
Medium
to position 0.
• Open the cover on the nozzle (2)
High
and carefully fill with tap water until
the water level has reached the MAX
mark on the side of the iron. Never fill
past this mark. Never use chemically
distilled water.
• The appliance can hold approx. 350
ml of water.
• Close the cover.
• Always pour the excess water away
after use.
30