Cargo 161952 Manual De Usuario página 2

161952 - 161953
TROUBLESHOOTING
If the inverter does not appear to be functioning properly, there can be sever-
al reasons why the inverter may not be responding.
1. POOR CONTACT
*Clean contact parts thoroughly
2. RECEPTACLE HAS NO POWER
*Check car fuse, replace damaged fuse
*Check receptacle wiring. Repair if necessary
3. FUSE IS BLOWN
*The fuse is located inside the p.c.b. replace fuse with a fuse of equivalent
value
4. OVERLOAD CAUSED AC OUTPUT TO REDUCE
*reduce the wattage of your load to lower than 3000 watts
5. THERMAL CAUSED AC OUTPUT TO REDUCE
*Under heavy loads for extended periods. the ac inverter will reduce output
to prevent damage to excess heat. if this happens, please proceed as be-
low:
A) Switch off the power switch of this inverter
B) Decrease load of this machine i. e. disconnect some of the appliances or
wait until this inverter become cool.
C) Switch on the power switch of this inverter.
6. LOW-BATTERY SHUTDOWN
*Recharge your battery and resume operation.
CAUTION
ALWAYS PLACE THE INVERTER IN AN
ENVIRONMENT WHICH IS:
• Well ventilated
• Not exposed to direct sunlight or heat source
• Out of reach from children
• Away from water/moisture, oil or grease
• Away from any flammable substance
2
Vedpak 238_Version 1_08.2021