Gewiss CHORUS GW 13 752 Manual Del Usuario página 20

3.3 INITIALIZATION WITH THE EASY BASE UNIT
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition ((the device still has the factory settings):
- select the "Application → New function" or "Application" → Edit function"
menu in the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the "Application → Search device" menu in the Easy base unit;;
- briefly press (< 2 seconds) the programming key. The programming LED
will light up during the acquisition process (figureA).
The device acquired by the Easy base unit will be listed, with the num-
ber assigned, in the channels of the "Application → New function"
or "Application" → Edit function" menus.
3.4 COMPLETING INSTALLATION
Use a screwdriver to raise the removable slides on the side of the buttons
(figure I) and place the labels with the functions icons to clearly identify each
button function. Replace the slides.
Insert the device into a Chorus support, making sure the rear programming
LED is at the bottom.
Complete the installation with other Chorus devices or covers and fix it to
the relative container (flush-mounted box, wall-mounted box etc). Apply the
finish plate.
20