BlissLights OBLIVIA-BLK-RGB Guía De Usuario página 7

SETTING UP THE PROJECTOR
Before operating your nebula projector, please read the "Before you Begin" section and
1. Connect power cord (end 3A, as shown on page 3) to the wall power adapter (4) and
tightly fasten the rounded cover. Connect end (3B) of the power cord to the two pin
socket on Oblivia (1) and screw the rounded cover tightly to ensure proper protection
from water leaks.
3A
2. Plug the wall power adapter to a 110/120V power outlet that is leak safe and suitable
for outdoor use.
3. Press the power button located on the back of the unit. The effect will gradually
illuminate and begin moving by default.
4. Place the BlissLights® Oblivia in the ground using the included stake, or use the
optional tripod accessory (sold separately) on a flat surface. Aim toward desired
foliage/area.
5. Press the power button again to cycle through default effects. To pair with the
BlissHome app, simply power on Oblivia, and it should appear automatically in the app
pairing screen.
6. To turn off the light, use the app or press the button to cycle through the effect modes
until the unit turns off completely. Remove the power plug from electrical outlet.
WIFI APP PAIRING
Oblivia can be paired with our BlissHome app (availble for free from the App
Store or Google Play Store). The app allows users to control device settings from a phone
or tablet, and provides extra features such as custom nebula color modes, speed control,
and many other features. You can also set up Google Home or Alexa voice control through
the app.
"Notice" section of this user's guide.
4
SCAN TO DOWNLOAD APP
4
3B 1