Mitsubishi Electric Mr. SLIM SEZ-M25 Instrucciones De Montaje página 5

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
㉔ ⑫ ⑬ ⑭ ⑮ ⑯
㉓
⑥
⑦
⑧
⑨
⑩
①
⑪
㉑
▌① Operation mode
Indoor unit operation mode appears here.
▌② Preset temperature
Preset temperature appears here.
▌③ Clock ( See the Installation Manual.)
Current time appears here.
▌④ Fan speed
Fan speed setting appears here.
▌⑤ Button function guide
Functions of the corresponding buttons appear here.
▌⑥
Appears when the ON/OFF operation is centrally controlled.
▌⑦
Appears when the operation mode is centrally controlled.
▌⑧
Appears when the preset temperature is centrally controlled.
▌⑨
Appears when the filter reset function is centrally controlled.
▌⑩
Indicates when filter needs maintenance.
▌⑪ Room temperature ( See the Installation Manual.)
Current room temperature appears here.
▌⑫
Appears when the buttons are locked.
▌⑬
Appears when the On/Off timer, Night setback, or Auto-off timer function
is enabled.
appears when the timer is disabled by the centralized control
system.
⑰ ⑱
③
⑲
㉒
⑳
④
②
⑤
<Basic mode>
㉔
㉓
①
▌⑭
Appears when the Weekly timer is enabled.
▌⑮
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌⑯
Appears while the outdoor units are operated in the silent mode.
▌⑰
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌⑱
Indicates the vane setting.
▌⑲
Indicates the louver setting.
▌⑳
Indicates the ventilation setting.
▌㉑
Appears when the preset temperature range is restricted.
▌㉒
Appears when an energy-saving operation is performed using a "3D
i-See sensor" function.
▌㉓ Centrally controlled
Appears for a certain period of time when a centrally-controlled item is
operated.
▌㉔ Preliminary error display
An error code appears during the preliminary error.
Most settings (except ON/OFF, mode, fan speed, temperature) can
be made from the Menu screen.
②
③
④
⑤
⑪ ).
5