Zibro R 617 E Instrucciones De Uso página 61

fuel filter
P
Q
Transportation cap
4
58
I
STORAGE (END OF THE HEATING SEASON)
We recommend that you burn up all the fuel in the fuel tank at the end of the heating
season and store the heater properly. Follow the procedure on the next page:
Ignite the heater outside the living room and let it burn until all fuel is used.
1
Let the heater cool down.
2
Clean the heater with a damp cloth and then dry it with a dry cloth.
3
Remove the batteries from the holder
4
5 Clean the fuel filter (refer to section H).
6 Store the heater in a dust-free place, if possible in its original packaging.
Unused fuel cannot be used for the next heating season. If there is still some
fuel left, do not throw it away, but dispose of it in accordance with the local
regulations for the disposal of domestic chemical waste. Always start the new
heating season with fresh fuel. When you start re-using the heater, follow the
instructions again (starting from Section A and as specified).
J
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
Let the heater cool down.
1
Remove the removable tank ¾ from the heater and remove the fuel filter
2
(Fig. P). Some drops may leak from the filter; keep a cloth at hand. Store the
fuel filter and the removable tank outside the heater.
Place the transportation cap into the position of the fuel filter (Fig. Q).
3
Press it tight.
Always move the heater in an upright position.
4
K
SPECIFICATIONS
Ignition
Fuel
Capacity (kW) *
Suitable space (m 3 ) **
Fuel consumption (l/hr)
Fuel consumption (g/hr)
Burning time per tank (hr)
Capacity removable tank (litres) 5.5
Weight (kg)
* At maximum setting
** Specified values are indicative
and store them in a dry place.
electrical Dimensions (mm)
paraffin (including base plate) depth
3.00
55-110 Accessories:
* 0.313
* 250
* 17.5 Required batteries
11.5 Wick type
width 562
279
height 502
manual fuel pump
fuel cap cover,
transportation cap
4 x LR20, MN1300
1.5V, Size D
C