Descargar Imprimir esta página

Hansgrohe Secuflex 28380 1 Serie Instrucciones De Montaje / Manejo / Garantía página 8

Publicidad

4
5
2.
1.
6
1.
8
!
1.
2.
3.
3.
2.
English
(1) Place the shank and sealing ring on the mounting
surface.
The positioning pin on the shank
must face away from the bather.
(2) Install the mounting hardware.
(3) Tighten the tensioning screws.
(1) Install the hose guide on the shank.
(2) Remove the o-rings on the bottom of the Secuflex
hose.
(3) Push the Secuflex hose into the shank.
Wrap the threads on the high pressure hose with
Teflon tape.
Remove the nut and brass plug from the other end of
the high pressure hose.
Do not discard the plug and nut.

Publicidad

loading