Publicidad
Idiomas disponibles
Idiomas disponibles
_________________________________
WIRING USING A CORD CONNECTION
NOTE: Use either a square or an octagonal outlet box cover
depending on the shape of your outlet box.
CORD WITH PLUG (Fig. 6a):
1.
Slide the fitting over the cord.
2.
Use wire nuts to connect the cord wires from the power plug
to the fixture wires.
3.
Use the fitting to connect the cord to the knockout (C).
4.
Mount the receptacle to the outlet box cover.
5.
Connect the wires from the receptacle to the supply wires in
the outlet box.
6.
Mount the outlet box cover to the outlet box using mounting
screws.
7.
Plug the cord into the receptacle.
HARDWIRED CORD (Fig. 6b):
1.
Slide the fitting over the cord.
2.
Attach one end of the SOOW Cord to the fixture wires inside
the fixture. Push the connections into the fixture
3.
Use a fitting to secure the cord to the fixture.
4.
Connect the outlet box cover to the opposite end of the cord
using a fitting.
5.
Connect the supply wires from the outlet box to the cord
wires using wire nuts. Push the connections into the outlet
box.
6.
Mount the outlet box cover using mounting screws.
Fig. 6a
or
Fig. 6b
or
or
C
______________________
FINISHING INSTALLATION
1.
With the power off, connect the
black supply wire to the two black
fixture wires. Connect the white
supply wires to the two white
fixture wires. Connect the ground
supply wire to the green ground
screw (Fig. 7).
2.
Reinstall the two channel covers
onto the channel using the retainer
clips (Fig. 8).
3.
To install the tube lamp, guide the
pins into the socket. Make sure
that the powered end of the tube is
placed on the center lamp holder
of the fixture. Guide the other end
of the tube into socket on end of
channel. Rotate the tube 90° (1/4
turn) in either direction until seated
(Fig. 9).
4.
Turn on the power.
__________
CONNECTING MULTIPLE FIXTURES IN A
ROW (OPTIONAL)
NOTE: The length of the fixture can be
extended by coupling it with an additional
fixture (either the 4ft. or 8ft. version).
1.
With channel cover removed, place
the strip connector (STCONN1 sold
separately) on the bottom of the
adjoining fixtures and into the provided
slots (Fig. 10).
2.
With both fixtures in place, tighten
wingnuts until secure. Repeat process
for desired number of fixtures.
BLACK FIXTURE
WIRE
BLACK SUPPLY WIRE
WHITE FIXTURE
WIRE
WHITE SUPPLY WIRE
GREEN GROUND
SCREW
SUPPLY GROUND WIRE
Fig. 7
Fig. 8
A
Fig. 9
N
L
Powered End
Unpowered End
Fig. 10
3
Publicidad
