Descargar Imprimir esta página

Black+Decker IR02V Manual De Uso Y Cuidado página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

IRONING TIPS AND TRICKS
This iron is designed to use normal tap water. If your water is very hard,
you can use a mixture of 50% tap water and 50% distilled water to
avoid build-up. It is not recommended to use water with perfumes or
scented additives.
Since it takes an iron longer to cool down than heat up, organizing
your clothing from Low to High temperature can cut down your
ironing time.
Whenever temperature settings are changed, allow the iron to stand a
minute or two to allow heat up or cool down. Test garment by pressing
a small hidden area to make sure temperature of iron is correct.
Whenever ironing a garment with mixed fabrics, read the garment's
tag for detailed directions or select the fabric setting for the most
delicate fabric. For example, when ironing a shirt that is 65% cotton
and 35% polyester, use the polyester setting.
If you're unsure of the fabric's content, test a small area (on the inside
seam or hem) before you proceed to iron the entire garment or cloth.
If water dripping occurs, this means that the soleplate isn't hot
enough to create steam. Just allow the iron a minute to reheat and
then resume ironing.
To prevent iron marks on your fabric, iron the fabric inside out.
Putting on your clothes right after ironing can actually create wrinkles.
Always allow your clothing to cool for about 5 minutes after ironing to
set the press.
All manuals and user guides at all-guides.com
8

Publicidad

loading