Bimar VK-6070A Folleto De Instrucciones página 27

CLEANING AND MAINTENANCE
Important: before performing routine cleaning, remove the plug from the mains.
• Regularly check that the filters are clean to ensure operation remains as effective as
possible.
• FILTER:
Place the purifier on a horizontal
-
surface covered with a soft cloth, or
another soft surface.
Turn the filter cover anticlockwise in
-
the direction shown by the arrow
- Remove the filter and fit the new
filter in place, taking care to
position it correctly
- Fit the lid onto the base so that the 3
pins are aligned with their respective
slots in the body, and turn fully
clockwise in the direction shown by the
arrow
place with a "click".
• To clean the body, use a soft cloth dampened with water and, if necessary, use also a
mild everyday detergent.
• Do not use abrasive or corrosive products.
• Do not immerse any electrical parts in water or another liquid. In the event this occurs,
dry carefully and check that the electric parts are completely dry. Only thereafter, plug
the appliance into the mains. If in doubt, contact a qualified professional.
• If the appliance is not used for long periods of time, you should store it away from dust
and moisture; we recommend using the original packaging.
• If you decide to no longer use the appliance, it is recommended that be made
inoperative by cutting the power cord (first ensure that the appliance has been
unplugged from the power supply), and ensure that any parts that could represent a risk
to playing children are put away.
; you will hear it lock in
27/64