Makita 9403 Instrucciones Originales página 5

Installing or removing abrasive belt
► 1. Lever
Pull the lever all the way out and install the belt over the
rollers, and then return the lever to the original position.
CAUTION:
• When installing the belt, make sure that the
direction of the arrow on the back of the belt
corresponds to the one on the tool itself.
Adjusting belt tracking
► 1. Adjusting knob
While the belt is running, use the adjusting knob to cen-
ter the belt tracking. Failure to do so can result in frayed
belt edges and wear on the sander frame.
1
1
5 ENGLISH
Dust bag
► 1. Dust bag 2. Dust spout
Attach the dust bag onto the dust spout. The dust spout
is tapered. When attaching the dust bag, push it onto
the dust spout firmly as far as it will go to prevent it from
coming off during operation.
When the dust bag is about half full, remove the dust
bag from the tool and pull the fastener out. Empty
the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might
hamper further collection.
► 1. Fastener
NOTE:
• If you connect a Makita vacuum cleaner to this
tool, more efficient and cleaner operations can
be performed.
1
2
1