Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Fig. 3
X1 PM10
Fig. 4
Fig. 5
Fig. 6
X1 PM10
X2 PM2.5
X3
X4
X5
X6
Fig. 7
8
USING YOUR H-PURIFIER
Plug in the Product [Fig. 3]:
Pull out the power cord from the cord reel and plug into a power supply.
All lights on the Control Panel / Display will fully illuminate for approximately 1 second to indicate a
succesful plug in.
The POWER button will be dimly lit and the CO sensor light will be ON to indicate that the Multi Sensor
Monitoring System has started working to monitor the indoor Carbon Monoxide level.
Switching on the Product [Fig. 4]:
To switch on your product, press the POWER button on the display.
The Air Quality LED Ring will illuminate through all colours in sequence whilst the sensors are analysing
the realtime air condition. After a few seconds, the Air Quality LED ring will select the appropriate colour
for the air quality at that time.
Your H-Purifier product will immediately enter AUTO MODE and begin to purify the indoor air.
The AUTO MODE button, INFORMATION button, LIGHT CONTROL button and PM10 information on
the Display will illuminate.
017
The following functions are available via the Display buttons:
Press the Wi-Fi button to turn on/off remote access.
Press the INFORMATION button to see all monitoring data.
Press the AUTO, MAX or SLEEP buttons to select a purifying mode.
Press the LIGHT CONTROL button to set the brightness of the display lights.
Press the CHILD LOCK button to inactivate all the buttons on the Control Panel / Display.
Press the DIFFUSER button to activate the function.
Press the POWER button to switch off the air purifier.
Pairing to Wi-Fi:
In order to access all the H-Purifiers functions from anywhere, it is suggested to download the hOn App.
You will be able to control your product in the most efficient way.
Instructions:
1.
Download the hOn application from the App Store or Google Play. [Fig. 5]
2.
Open the APP, create an account with your e-mail and a password.
3.
Confirm login.
4.
Ensure your mobile device is connected to Wi-Fi.
5.
Log into the hOn app.
6.
Press and hold the Wi-Fi button on the display for 5 seconds, there will an audible beep and the
Wi-Fi button will start flashing to indicate it is waiting for a connection. [Fig. 6]
7.
Follow the in app instructions to connect your mobile device to your product.
8.
When successfully paired, the Wi-Fi button on the product will remain illuminated.
9.
To reset the Wi-Fi, press & hold the Wi-Fi button for 5 Secs.
Wireless Parameters for Pairing
Technology
Standard
Frequency Band(s) (MHz)
Maximum Power (mW)
INFORMATION Function [Fig. 7]:
There are 6 different data sets available to monitor:
PM10, PM2.5, GAS, Temperature, Humidity, and Filter Status.
To monitor each value simply press consecutively the INFORMATION button.
By default the display will show the PM10 data, the machine will remember user's last selection and
maintain this selection the next time the product is switched on.
090
The GAS data will show spinning cursor during the initial 3 minutes after product is switched on, while
065
the GAS sensor is performing a calibration cycle.
GAS
L3
TEMP
16
More info on PM 2.5, PM 10 and GAS:
36
HUMIDITY
PM indicates fine particles (not visible to the human eye) deriving mainly from outdoor pollution such as
vehicles and industrial emissions and potentially dangerous to our health in case of prolonged exposure.
-
FILTER LIFE
PM 10 have a size up to 10 µm and are capable of penetrating the upper respiratory tract (nose,
trachea, pharynx).
PM 2.5 have a size up to 2.5 µm and, given their small dimension, they can reach our lungs, thus
Wi-Fi
Bluetooth
IEE 802.11 b/g/n
Bluetooth v4.2, BR/EDR, BLE
2401 ~ 2483
2402 ~ 2480
100
10
Publicidad
