Publicidad
Idiomas disponibles
Idiomas disponibles
TC
6.7
Removing the lid
You can remove the lid of the cooler (fig. 5, page 4):
➤
Open the lid until it is at a ca. 30° angle to the cooler.
➤ Pull the lid forwards and lift it off diagonally.
7
Cleaning and servicing
WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
8
Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Cleaning and servicing
12
Publicidad
